Aws4 request&x amz signedheaders=host&x amz signature=5914e8bf32e4049eb7ef49bf22f9e253ce4ad1841aaf861013ddd4755d74499c

Rupert Neve Portico II Channel Strip

The Portico II Channel was created using the high voltage topologies from the 5088 to create a channel strip with the ultimate sound quality. Comprised of a fully-featured mic preamplifier, 4-band EQ, compressor-limiter, “texture” control and level metering, the Portico II Channel includes a bevy of new features including; Variable Silk with Texture control, a fully tunable “de-esser”, multiple VCA filtering and detection options, a transient-optimized swept HPF and parallel compression blending.

Free Tech Support

$4,095.00

Aws4 request&x amz signedheaders=host&x amz signature=77cc5a8f299be8cd9a487e1567d1bc60618b874aae58c0df3080bdba43c1ef05

Description

For recording and mixing engineers, the greatest challenge will always be to capture and transform disparate 2-D elements into an engrossing 3-D vision that elicits the same raw emotions and compelling vibrance as the live performance. With the Portico II Channel, every possible attention has been paid towards producing the most accurate, sweet-sounding audio topologies, while enabling engineers with the tools they need to boldly shape or fine tune tracks to the limits of their imaginations.

The Portico II Channel was created using the high voltage topologies from the 5088 to create a channel strip with the ultimate sound quality. Comprised of a fully-featured mic preamplifier, 4-band EQ, compressor-limiter, “texture” control and level metering, the Portico II Channel includes a bevy of new features including; Variable Silk with Texture control, a fully tunable “de-esser”, multiple VCA filtering and detection options, a transient-optimized swept HPF and parallel compression blending. With its simple yet powerful topologies and extensive feature set, every element of the Portico II: Channel is geared towards empowering recording artists to realize these visions.

Input Section
Input signals may be derived from any of three sources; Microphone, Line or DI. The Microphone input has a 10K Ohm non-reactive input resistance that handles a full 26dBu signal without the need for a pad. A primary Gain control provides 66dB of gain in 6dB increments for easy recall with a +/- 6dB Trim for fine adjustment. A transient-optimized HPF variable from 20-250Hz is included. Additionally, a 48V Phantom Power switch, Phase Inversion, Signal Present indicator and a Mute switch are included. The pre-amp is a TLA non-reactive design that precludes the loading of microphones with limited driving capability and which maintains a 2 dB noise figure over a wide range.

Inserting a plug into the DI input selects a 3M Ohm discrete FET DI circuit with a transformer-coupled topography that optimizes both the microphone and DI inputs, allowing low impedance microphones and high impedance sources like electric guitars and basses to sound their very best. Primary Gain and Trim controls are fully operational. A “Thru” jack on the front panel that duplicates the unaffected source signal allows the use of an external amplifier if required. A “Line” switch selects the independent Line XLR non-reactive input circuit that includes the HPF and Level Trim controls.

Specs

Preamp TypeSolid State
Number of Channels1
Frequency Response2Hz-160kHz (-3dB)
Phantom PowerYes
EQYes
CompressorYes
Other ProcessingTextre
Analog Inputs1 x XLR (Mic), 1 x XLR (Line), 1 x 1/4" (Hi-Z)
Analog Outputs1 x XLR
Other I/O1 x 1/4" (Thru), 2 x 1/4" (Sidechain Send, Return), 2 x 1/4" (Link)
Rack Spaces2U
Height3.5"
Depth10"
Width19"
Weight20 lbs.
Manufacturer Part NumberPortico2

Related Products

Aws4 request&x amz signedheaders=host&x amz signature=c455b72a2cfaa559c533f906e1fb0bdb96f5896adc3dbcb03d81a8867a6ee8b6

Microtech Gefell AP1

$1,889.00

More Info
Aws4 request&x amz signedheaders=host&x amz signature=3b5ac2abb21f3095f7a383ec4582a6dabedbd36c29371b5d6f8adac45b7a5e8f

Manley Labs Force

$2,970.00

More Info