Aws4 request&x amz signedheaders=host&x amz signature=fca291b91107a222384b63179908b6f7de8a8507b9511cad2a9d39ef88d9ebea

Rupert Neve 5017 Mobile Pre/DI/Compressor with Vari-Phase

Comprised of a rugged, portable chassis with world class Portico pre-amp, compressor and DI circuits as well as two channel operation, variphase, silk and DI/mic blending capabilities, the Portico 5017 is an innovative and powerful tool for recording or live performance. In replacing the Portico 5016 Mic Pre / Variphase DI, the 5017 Mobile DPC adds single knob compression, DI / Mic Pre blending, and a go anywhere design to a well established classic.

Free Tech Support

$1,395.00

Aws4 request&x amz signedheaders=host&x amz signature=2111e06afe74ce857e0bf124416250a5e8501177b57cd8b990f243e6294923af

Description

Comprised of a rugged, portable chassis with world class Portico pre-amp, compressor and DI circuits as well as two channel operation, variphase, silk and DI/mic blending capabilities, the Portico 5017 is an innovative and powerful tool for recording or live performance. In replacing the Portico 5016 Mic Pre / Variphase DI, the 5017 Mobile DPC adds single knob compression, DI / Mic Pre blending, and a go anywhere design to a well established classic.

With Portico Series custom transformers and silk mode, the Mobile DPC’s sonic signature is nothing short of legendary. It’s the 5017’s revolutionary feature set however that make it an indispensable tool for studio recording, live recording and stage performances.

Dual Channel Use
Used as a two channel device, a lead singer and guitar player, can take the classic studio quality of the 5017 wherever they go; using the DPC for a Vocal mic pre and compressor, as well as a separate DI preamplifier. To achieve this, the blend control should be selected as fully DI (blend off), and an internal jumper can be selected to apply the compressor to the mic pre signal. When engaged, Silk mode would effect both vocal and guitar tracks, and the HPF control would effect only the mic path.

Blended Use
Used as a single channel device for instruments, the 5017 can be used to phase align, combine and compress direct and amplified signals. To achieve this, use the DI for the instrument’s direct signal and the mic preamp for the speaker cabinet signal. The blend control is used for mixing direct and amplified signals to achieve the desired tonal blend between the two sources, and the variphase is used to minimize or extenuate phase cancellations between the two signals. To compress the blended signal, the internal compressor jumper must be set to the blend path (this is the default setting). This technique could also be used to create a single, mixed output of a guitar and vocals.

The Compressor
Based around a new LDR (light dependent resister) design, the 5017’s opto-coupler compressor has been simplified to a single threshold control with auto make up gain. By default, the compressor is set to a fixed 2:1 ratio with an internal jumper to change between standard and fast time constants. To set the compressor, simply dial the threshold control down until the desired amount of compression is achieved. An LED light indicates when the compressor is active.

Vari-Phase
In addition to the standard polarity reverse, the 5017 also incorporates a vari-phase control to adjust the phase incrementally. This control is useful any time two signals derived from the same source are combined.

For instance, even with careful placement, the combination of close miced drums and overheads, can often yield hollow sounding results. By using the variable phase adjust, the direct signal can be phase rotated until the signals are naturally aligned.

This technique is also extremely useful when combined with the internal blend control on instruments. A bassist, using both direct and miced signals can blend the two into a single output, using the vari-phase to reach an optimal alignment. By adjusting the phase in the 5017, the musician or engineer can find the absolute best mic position without regard to the phase relation to the direct signal.

With the 5017, the Portico sound is always within reach.

Specs

Preamp TypeSolid State
Number of Channels1
Frequency Response10Hz-160khz (@ -3dB)
Phantom PowerYes
Compressor Threshold10dB to -20dB
Compressor Ratio2:1
Analog Inputs1 x XLR (Mic), 1 x 1/4" (Hi-Z)
Analog Outputs1 x XLR, 1 x 1/4" (Mic Out)
Other I/O1 x 1/4" (Thru)
Manufacturer Part Number5017

Related Products

Aws4 request&x amz signedheaders=host&x amz signature=b73bfadad7242e8243f66bc63a949f8d0b2e4d40e3ed5f0b2d945549b3d3af70

Microtech Gefell AP1

$1,889.00

More Info
Aws4 request&x amz signedheaders=host&x amz signature=9704a839b5fa41cdf727a3a129929cd1251c6edd36daaae8109fd5e352b5f79d

Manley Labs Force

$2,999.00

More Info