Large skm183ni d99172a505

Neumann KM 183 Stereo Pair Ni

Stereo set includes two each: KM 183, SG 21 BK, WNS 100 in one woodbox

Free Tech Support

$2,550.00 $2,040.00

Thumb skm183ni d99172a505

Description

The nickel SKM 183 NI Stereo Matched Microphone Pair from Neumann is a kit containing a stereo matched pair of the KM 183 microphones. The microphones feature omnidirectional, pressure-condenser elements intended for live-sound reinforcement and broadcast as well as recording applications. The KM 180-series microphones feature an output stage based on the KM 100. Transformerless circuitry and balanced output result in high-output gain with a very low noise floor and no coloration to the output signal. The KM 183 is powered via +48V phantom power.The stereo pair are matched in sensitivity and frequency response and provide optimum results when capturing performances or ambiance. The 20 Hz to 20 kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 183's omnidirectional polar pattern provides a generous pickup area, and is suitable for ambiance or spot miking instruments such as piano, wind instruments, organ, and choir. The KM 183 handles sound-pressure levels up to 140 dB, allowing close miking of instruments high in transient-level (peak) response.

Omnidirectional Polar Pattern

The KM 183's omnidirectional polar pattern offers a generous pickup area suitable for room ambiance capture as well as spot miking pianos, organs, wind instruments, and choir.

KM 100-Based Output Stage

The KM 183 features the same output stage electronics as the KM 100. Transformer-less circuitry and quiet balanced-output design ensure a clean, high-gain output signal without any coloration. The KM 183 is powered via +48V phantom power, and its 20 Hz to 20 kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 183 can handle sound-pressure levels up to 140 dB, allowing close miking of instruments.

Compact Rugged Construction

The slim design and rugged construction allow easy microphone placement while remaining roadworthy.

Black Matte Finish

The black matte finish makes the microphone less conspicuous, thus making it a suitable microphone for television broadcast.

Features

Nickel Finish

Uncolored, High-Gain Output Signals

Compact & Rugged

Transformerless Circuitry

KM 100-Based Output Stage

Omnidirectional Pattern

For Live-Sound Reinforcement & Broadcast

Small Diaphragm

Mini Pressure-Condenser Microphone

Matched Pair with Custom Case

Specs

Operating PrinciplePressure Gradient
TransducerCondenser
Polar PatternOmnidirectional
Frequency Range20 Hz to 20 kHz
Signal to Noise Ratio70 dB CCIR81 dB A-Weighted
Equivalent Noise Level24 dB CCIR13 dB A-Weighted
Maximum SPL140 dB SPL 0.5%
Impedance50 ohms
Load Impedance1 kOhms
Sensitivity12 mV/PA @ 1 kHz into 1 kOhms
Power Requirements48 V+/- 4 V
Output Connectors3-pin XLR
Operating Current Consumption3.2 mA
Length4.21" (107 mm)
Diameter0.87" (22 mm)
Weight2.82 oz (80 g)